Disclaimer

-

 

Disclaimer

Last updated: 06-11-2025

The information provided on Industrial Safety & SOP Blog (the “Blog”) — accessible at https://greensafetyengineer.blogspot.com/ — is for general informational and educational purposes only. All content on this Blog is published in good faith and for sharing knowledge related to industrial safety, Standard Operating Procedures (SOPs), and workplace safety awareness.

However, Vasanth, the author and owner of this Blog, makes no representations or warranties of any kind, express or implied, regarding the accuracy, reliability, adequacy, validity, or completeness of any information provided.

Under no circumstances shall Industrial Safety & SOP Blog or its author be held liable for any loss or damage of any kind incurred as a result of the use of this Blog or reliance on any information provided herein. Your use of the Blog and your reliance on any information is strictly at your own risk.

 

Professional Disclaimer

The content on this Blog is not intended to replace professional safety, engineering, or compliance advice. While I strive to provide accurate and up-to-date safety information, readers should always consult qualified safety professionals and refer to official government or regulatory standards (such as OSHA, ISO, or other regional authorities) before implementing any safety measures or SOPs discussed here.

 

External Links Disclaimer

This Blog may contain links to other websites or external sources. These links are provided for convenience and informational purposes only. Industrial Safety & SOP Blog and its author do not control, guarantee, or endorse the accuracy or reliability of any information found on external websites.

 

Affiliates Disclaimer

At times, this Blog may include affiliate links. If you purchase a product or service through these links, I may receive a small commission at no additional cost to you. This helps support the Blog and maintain the content without any bias or obligation to promote specific products.

 

Views Expressed Disclaimer

All opinions expressed on this Blog are personal views of the author, Vasanth, and do not represent the opinions of any organization, employer, or professional association.

 

 

 

 


Comments

Post a Comment

thank you

The Factories Act, 1948

Do's and Dont' earthing system

-
Image
DO's of Earthing System: Do ensure that the earthing system is installed and maintained by qualified professionals with expertise in electrical systems and grounding. Do follow the local electrical codes, regulations, and standards applicable to your region when designing and installing an earthing system. Do use high-quality materials and components that are suitable for the specific application and environmental conditions. This includes copper or galvanized steel grounding electrodes, conductors, clamps, and connectors. Do ensure proper bonding between different metallic components, such as electrical panels, equipment, pipes, and structural elements, to create an effective and continuous grounding network. Do regularly inspect and test the earthing system to ensure its integrity. This includes checking for physical damage, corrosion, loose connections, and adequate resistance to ground. Do provide a separate dedicated earth electrode for sensitive equipment or syste...
Read more

Standard Operating Procedure (SOP) for Working at Height

-
Image
  Standard Operating Procedure (SOP) for Working at Height working at height  A Standard Operating Procedure (SOP) for working at height is a systematic and comprehensive approach to ensure the safety of workers who perform tasks at elevated levels. The main objective is to prevent accidents, injuries, or fatalities related to falls. Below is a sample SOP framework for working at height. 1. Purpose and Scope: Purpose: To establish safe working practices for performing tasks at height, in compliance with regulations and industry best practices. Scope: Applies to all workers involved in work at height, including maintenance, construction, or any activity where the risk of falling from height exists. 2. Responsibilities: Employer: Ensure proper safety measures, training, and equipment are provided. Supervisor: Oversee that workers follow SOP, conduct regular inspections, and ensure proper safety protocols are in place. Workers: Follow all safety protocols, us...
Read more

The Factories Act 1948

-
"The Factories Act, 1948." Extent: This Act extends to the whole of India, except the State of Jammu and Kashmir (at the time it was enacted; post-2019 changes have affected Jammu and Kashmir's applicability). Commencement: The Act was enacted on 23rd September 1948 but came into force on 1st April 1949. Specific provisions may have different dates of enforcement as decided by the government. 1. Factory: Any premises where a manufacturing process is carried out with the aid of power and employs 10 or more workers, or without power, employs 20 or more workers. 2. Worker: A person employed in any manufacturing process, cleaning, or any work incidental to a manufacturing process, whether directly or through an agency, and regardless of pay. 3. Occupier: The person with ultimate control over the affairs of the factory, often the owner or a designated manager. The term imposes legal obligations on the occupier for compliance with safety, health, and welfare standa...
Read more

Standard Operating Procedure (SOP) for Lathe machine Operation

-
Image
  1. Before starting the machine, check the electrical connections. 2. Before starting the Machine, all moving parts should be oiling. 3. Clamp the job on machine jaw properly. 4. Check that job clamping is true or not. 5. Adjust the speed & feed according to job finishing. 6. Check the tool is sharp & clamp properly. 7. After starting the machine, check first piece by supervisor & then start the production. 8. At the time of operating, operator should wear Hand gloves & shoes. 9. At the time of operating, operator should concentrate on his work which will eliminate unfortunate accidents. 10. After finishing your work clean the machine properly. 11. Switch off machine & all electrical equipments before leaving the shop floor.   बि जली की बचत ही बि जली का नि र्मा ण है . Standard Operating Procedure (SOP) for Lathe machine Operation ले थ मशीन 1. मशीन को शुरू करने से पहले बि जली के कनेक्शन की जाँच करे...
Read more

Forklift Safety Training

-
Image
1: Introduction to Forklift Safety Ø   Importance of Forklift Safety: -           Protecting lives and preventing injuries -           Reducing equipment and property damage -           Compliance with regulations (e.g., OSHA) Ø   Training Objectives: -           Understanding types of forklifts and their features -           Conducting pre-operation inspections -           Safe operation and load handling practices -           Identifying and avoiding workplace hazards -           Proper refueling and maintenance -           Responding effectively to emerge...
Read more

safety helmet IS:2925

-
Image
TITLE ; Safety Helmet  Safety helmets, also known as hard hats, are designed to protect the head from potential hazards in various environments, including construction sites, industrial workplaces, mining operations, and other settings where falling objects, impacts, or electrical hazards may occur. Here are some key reasons why safety helmets are important: Head protection: Safety helmets provide a crucial barrier between the head and potential sources of injury. They are designed to absorb and distribute the force of impacts, reducing the risk of skull fractures, traumatic brain injuries, and other head-related injuries. Falling object protection: In industries where there is a risk of objects falling from above, such as construction sites or manufacturing facilities, safety helmets offer vital protection. They can help prevent serious head injuries caused by falling tools, equipment, or debris. Electrical hazard protection: Some safety helmets are specifically designed ...
Read more

Welding Do's and Don't

-
Image
Dos: Wear appropriate personal protective equipment (PPE) such as welding helmets with a proper shade, safety glasses, welding gloves, flame-resistant clothing, and steel-toed boots. Ensure that your work area is well-ventilated to prevent the accumulation of harmful fumes and gases. Use local exhaust ventilation systems if necessary. Inspect your welding equipment regularly to ensure it is in good working condition and free from defects. Repair or replace any damaged parts promptly. Use the correct welding technique and follow industry-standard procedures. Seek proper training if you are not familiar with the specific welding process. Position your workpiece securely to prevent accidental movement during welding. Use clamps or fixtures when necessary. Be aware of fire hazards in your surroundings. Keep a fire extinguisher nearby and know how to use it. Maintain a clean and organized work area. Remove any flammable materials and keep a clear path for movement. Take brea...
Read more