safety officer

"The Factories Act, 1948." Extent: This Act extends to the whole of India, except the State of Jammu and Kashmir (at the time it was enacted; post-2019 changes have affected Jammu and Kashmir's applicability). Commencement: The Act was enacted on 23rd September 1948 but came into force on 1st April 1949. Specific provisions may have different dates of enforcement as decided by the government. 1. Factory: Any premises where a manufacturing process is carried out with the aid of power and employs 10 or more workers, or without power, employs 20 or more workers. 2. Worker: A person employed in any manufacturing process, cleaning, or any work incidental to a manufacturing process, whether directly or through an agency, and regardless of pay. 3. Occupier: The person with ultimate control over the affairs of the factory, often the owner or a designated manager. The term imposes legal obligations on the occupier for compliance with safety, health, and welfare standa...

 Factories Act, 1948 [Act No. 63 of Year 1948 dated 23rd. September, 1948] Contents Sections Particulars Chapter I Preliminary 1 Short title, extent and commencement 2 Interpretation 3 References to time of day 4 Power to declare different departments to be separate factories or two or more factories to be a single factory 5 Power to exempt during public emergency 6 Approval, licensing and registration of factories 7 Notice by occupier Chapter II The Inspecting Staff 7A General duties of the occupier 7B General duties of manufacturers, etc., as regards articles and substances for use in factories Chapter II The Inspecting Staff 8 Inspectors 9 ...

  1. Before starting the machine, check the electrical connections. 2. Before starting the Machine, all moving parts should be oiling. 3. Clamp the job on machine jaw properly. 4. Check that job clamping is true or not. 5. Adjust the speed & feed according to job finishing. 6. Check the tool is sharp & clamp properly. 7. After starting the machine, check first piece by supervisor & then start the production. 8. At the time of operating, operator should wear Hand gloves & shoes. 9. At the time of operating, operator should concentrate on his work which will eliminate unfortunate accidents. 10. After finishing your work clean the machine properly. 11. Switch off machine & all electrical equipments before leaving the shop floor.   बि जली की बचत ही बि जली का नि र्मा ण है . Standard Operating Procedure (SOP) for Lathe machine Operation ले थ मशीन 1. मशीन को शुरू करने से पहले बि जली के कनेक्शन की जाँच करे...